Finishing and Polishing Equipment
Including buffing and wash head pads.
A01/01: Rymplecloth
100% cotton and certified Silicone free. PH neutral and extremely low linting. Meets Boeing Douglas + AMS specifications. The crimped finish gives Rymplecloth more surface area for collecting and trapping dirt particles. Applications include - AEROSPACE. Composites. Bonding. Painting. Fuel cells. Transparency (cleaning and polishing). INDUSTRIAL. For cleaning and polishing composite moulds and preparation needed prior to painting and bonding.
A01/02: Cheesecloth
Meets Boeing Douglas AMS Specifications Etc. 100% cotton and certified Silicone free. PH neutral and extremely low linting. Packed in cases of 12 rolls each roll 128 pieces 9 x 24 inches. Very soft, absorbent and economical.. Applications include- INDUSTRIAL - wiping polishing . Filtering and painting.
N013: Wash Head Pads 9in
Pure cotton cleaning pad specially designed to fit the universal holder. Use for both applying and buffing polish. Washable and can be quickly reversed on the holder to give a clean pad using the Velcro fastener.
N014: Holder for Wash Heads & Scrub Pads
Sturdy and unique design with "velcro" fastener for rapid attachment and release of wash heads and scrub pads. Knuckle joint readily adapts and holds required angle of application and follows surface contours.
N015: Scrub Pads White 9in
Specially designed to fit the universal holder. Use to apply polish and scrub stubborn areas. Will not damage surface. Can be quickly reversed using the "velcro" fastener to give a clean pad.
NOR01: BU20 Wool Buffing pad 306045
Available for all drum machines including inflatable pneumatic buffers. Wool for unpainted planes in service .Wool first - more aggressive cut - cotton to finish. If you unsure of which type of pad best suits your needs then please contact us for impartial advice.
NOR02: BU1 Cotton Buffing Pad 304050
Fits the pneumatic drum buffer. Use cotton for finishing operations and wool for cutting operations. Please contact us if you are unsure of which type of pad best suits your needs.
NOR03: Bright White Buffing Pads for 534 machine
A longer pile pure wool bright White buffing pad to fit the 534 wheel to give the finest finish to all brightwork.
NOR04: Cotton Buffing Pad for LL1015
100% cotton pad to suit LL1015 buffing machine. Will also fit any 7in x 5in Diameter drum with clip fittings.
NUM01: Buffing Pads for 320 Wheel 6074
Available for Detail machines for use on leading edges and clean up. All pads are guaranteed against defects in materials and workmanship and comply with relevant specifications. Pure wool for cutting and finishing.
NUM04: Cleo Pads for 534 Machine
Pure cotton pads with reinforced seam specially designed to fit the 534 buffing machine. Will give a high resolution "mirror" finish.
P02/01: Micromesh 3600 50ft x 6in Roll
Finer grade than the 1800 but with the same characteristics will not scratch or gouge.
P02/02: Micromesh 1800 50ft x 6in Roll
Micro-mesh is a cushioned abrasive with Silicone carbide or aluminium oxide crystals bonded to a layer of latex with flexible glue with a cloth backing. When contact pressure is applied the crystals present their sharp cutting edges evenly across the surface. Uneven crystals produce gouges and random scratches. Micro-mesh achieves superior finishes in a wide range of industrial and consumer applications worldwide.
S004: C60 Tack Rags to Boeing Spec d16-I816
The only Tack Rag which meets Boeing specifications. Available in cartons of 400. Supplied with Certificate of Compliance to Boeing Spec Number D6-1816. Cotton 4-ply 30in. X 36in.
Back to Online Catalogue